Dell Precision Workstation 530 Скачать руководство пользователя страница 61

Страница: 61 / 300

Advanced Features

Lay the computer down on its right side.

Open the computer cover

Install the TAPI-compliant expansion card

See the manufacturer’s documentation for more information.

Enter

system setup

, click

Integrated Devices

, and change the setting

for

Sound

Off

Connect external audio devices to the sound card’s connectors. Do not

connect external audio devices to the microphone,

speaker/headphone, or line-in connectors on the computer back panel

(see "

Back-Panel Features

").

Connect the 4-pin TAPI cable to the TAPI sound-card connector.

To locate the TAPI connector on the sound card, see the

manufacturer’s documentation.

Connect the 4-pin TAPI cable to the TAPI expansion-card connector.

To locate the TAPI connector on the expansion card, see the

manufacturer’s documentation.

Close the computer cover

Stand the computer upright.

Reconnect the computer and devices to their electrical outlets, and

turn them on.

NOTE:

If enabled, the

Chassis Intrusion

option will cause the following

message to be displayed at the next system start-up:

ALERT! Cover was previously removed.

Install the appropriate TSP for the TAPI devices.

See the manufacturer’s documentation and your Windows

documentation for more information.

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды