Dell Precision Workstation 530 Скачать руководство пользователя страница 148

Страница: 148 / 300

148

Solving Problems

.co

ll.c

•

If using headphones, ensure that the headphone cable is connected to

the speaker/headphone connector (see "

Front View of the Computer

(Doors Open)

" and "

Back-Panel Features

").

•

If using a sound card, ensure that external audio devices are connected

to the sound card’s connectors and not to the microphone,

speaker/headphone, or line-in connectors on the computer back panel

(see "

Back-Panel Features

").

•

Ensure that audio is not muted in the

settings. See the OS

documentation for more information.

•

Adjust the volume control on the speakers, if it is provided.

•

Adjust the volume control in the audio software. For more

information, see the documentation for either your OS or your audio

software.

•

If you are trying to listen to an audio

, try different CDs.

•

Reinstall the audio driver for your operating system.

•

Check for interference: electrical appliances on the same circuit or

operating in close proximity to the computer can cause interference.

If the problem still exists after you complete the basic checks, fill out the

Diagnostics Checklist

as you perform the following steps:

Turn off nearby fans, lights, lamps, or other electrical devices.

Are the external speakers working properly?

Yes

. One or more of those electrical devices was causing interference.

The problem is resolved.

. Go to

step 2

Enter

system setup

and ensure that

Sound

under the

Integrated

Devices

option is set to

. Then exit system setup properly to save

the information, and turn on the computer.

Is the device working properly?

Yes

. The problem is resolved.

. Go to

step 3

Run the Misc. PCI Devices tests in the

Dell Diagnostics

Did the tests complete successfully?

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды