Dell Precision Workstation 530 Скачать руководство пользователя страница 159

Страница: 159 / 300

Solving Problems

159

At the

C: prompt

, type:

CD\Windows\Command

and press

<Enter>.
Type

chkdsk

and press <Enter>.

This utility creates and displays a status report and lists and

corrects errors on the disk.

• For Microsoft Windows NT, run the error-checking utility by

opening the property sheet of the affected volume(s) and clicking

Check Now

in the

Error-checking

section of the

Tools

tab.

Is the drive operating properly?

Yes

. The problem is resolved.

. Go to

step 3

Run the appropriate test group in the

Dell Diagnostics

• For an

IDE

EIDE

hard drive, run the IDE Devices device group.

• For a

SCSI

hard drive, run the SCSI Devices device group.

Did any of the diagnostics tests fail?

Yes

. Go to the next question.

. Go to

step 4

Did any of the diagnostics tests indicate a faulty drive?

Yes

. The hard drive may be faulty.

Contact Dell

for technical

assistance.

. Go to the next question.

Did any of the diagnostics tests indicate a faulty drive controller?

Yes

. The system board may be faulty.

Contact Dell

for technical

assistance.

. Go to

step 4

Turn off the computer and devices, disconnect them from their

electrical outlets, and wait 10 to 20 seconds.

Lay the computer on its right side.

Open the computer cover

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Dell Precision Workstation 530, Руководство пользователя, Страница: 159 / 300

Результаты поиска

Содержание Precision Workstation 530

Отзывы: