Dell Precision Workstation 530 Скачать руководство пользователя страница 56

Страница: 56 / 300

Advanced Features

.co

ll.c

Turn off the computer and devices, disconnect them from their

electrical outlets, and wait 10 to 20 seconds.

Lay the computer on its right side.

Open the computer cover

Remove the jumper plug from the PSWD jumper to disable the

password feature.

See "

Jumper Settings

" to locate the password jumper (labeled

"PSWD") on the system board.

Close the computer cover

Stand the computer upright.

Reconnect the computer and devices to their electrical outlets, and

turn them on.

The existing password(s) are erased.

NOTE:

If enabled, the

Chassis Intrusion

option will cause the following

message to be displayed at the next system start-up:

ALERT! Cover was previously removed.

Proceed to

step 9

if you want to assign a new password.

NOTE:

Before you assign a new system and/or setup password, you must

install the PSWD jumper plug to reenable the password feature.

Turn off the computer and devices, disconnect them from their

electrical outlets, and wait 10 to 20 seconds.

Lay the computer on its right side.

Open the computer cover

Install the PSWD jumper plug.

Close the computer cover

Stand the computer upright.

Reconnect the computer and devices to their electrical outlets, and

turn them on.

Turning on your computer with the PSWD jumper installed reenables

the password feature. When you enter

system setup

, both password

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды