Dell Precision Workstation 530 Скачать руководство пользователя страница 28

Страница: 28 / 300

About Your Computer

.co

ll.c

•

Speaker/headphone jack

—used to connect computer speakers,

headphones, or other audio output devices. This jack is amplified to

support headphones.

•

Line-in jack

—used to connect record/playback devices such as cassette

players, CD players, and VCRs.

PS/2 Mouse Connector

Attach the

PS/2

mouse cable to the 6-pin mouse connector on the back

panel. If your computer uses Microsoft

Windows

, Dell installed the

necessary mouse drivers on your hard drive.

NOTE:

This connector is similar to the keyboard connector. Ensure that you

correctly identify the mouse connector before you connect the device.

NOTE:

Do not attempt to operate a PS/2 mouse and a USB mouse

simultaneously.

PS/2 Keyboard Connector

Attach the PS/2 keyboard cable to the 6-pin keyboard connector on the back
panel.

NOTE:

This connector is similar to the mouse connector. Ensure that you

correctly identify the keyboard connector before you connect the device.

IEEE 1394 (FireWire) Connector

Used to attach high-speed serial multimedia devices. For more information,
see "

IEEE 1394 (FireWire)

USB Connectors

Used to attach USB-compliant devices such as keyboards, mice, printers,
and speakers to your computer.

NOTE:

When connecting a USB mouse or keyboard, ensure that you connect

to one of the Port 1 USB connectors on the back of the computer.

NOTE:

Do not attempt to operate a PS/2 mouse and a USB mouse

simultaneously.

NOTICE:

USB devices do not operate with Microsoft Windows NT

Network Adapter

The

network adapter

has the following lights:

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды