Dell Precision Workstation 530 Скачать руководство пользователя страница 153

Страница: 153 / 300

Solving Problems

153

If you are using a

PS/2

mouse, enter

system setup

and ensure that

Mouse Port

under the

Integrated Devices

option is set to

. Then

exit system setup properly to save the information, and reboot the

computer.

Is the device working properly?

Yes

. The problem is resolved.

. Go to

step 3

If you are using a PS/2 mouse, run the

Mouse

test in the Pointing

Devices device group in the

Dell Diagnostics

Did the tests complete successfully?

Yes

. Go to the next question.

Contact Dell

for technical assistance.

Do you have another computer that is working properly?

Yes

. Go to

step 4

. Go to the next question.

Do you have another mouse that is working properly?

Yes

. Turn off the computer, wait 10 to 20 seconds, and disconnect the

mouse. Then go to

step 6

Contact Dell

for technical assistance.

Turn off the original computer, wait 10 to 20 seconds, and disconnect

the mouse.

Turn off your other computer, wait 10 to 20 seconds, and disconnect

its mouse. Connect the mouse from the original computer, and then

turn the computer on.

Is the mouse working properly?

Yes

. There is a problem with the original computer.

Contact Dell

for

technical assistance.

. The mouse may be defective.

Contact Dell

for technical

assistance.

Connect a different mouse to the computer, and then turn the

computer on.

Is the mouse working properly?

Yes

. The original mouse is defective. The problem is resolved.

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды