Dell Precision Workstation 530 Скачать руководство пользователя страница 144

Страница: 144 / 300

144

Solving Problems

.co

ll.c

•

If the monitor display is blank, the computer may be in suspended, or

hibernate, state. Push and release the power button, move the mouse,

or press a key on the keyboard to bring the computer out of the

suspended state.

•

Disconnect the monitor interface cable from the computer and check

the cable connector for bent or broken pins. Check for damaged or

frayed cables.

•

If the monitor interface cable is not damaged, ensure that it is firmly

connected to the computer.

•

Adjust brightness and contrast settings on the monitor.

If the problem still exists after you complete the basic checks, fill out the

Diagnostics Checklist

as you perform the following steps:

Turn off the computer, wait 30 seconds, and then turn the computer

back on.

Allow 1 minute for the computer to initialize its components, and

then adjust the monitor's brightness and contrast controls.

Is the monitor readable?

Yes

. The problem is resolved.

. Go to

step 3

Turn off nearby fans, lights, lamps, or other electrical devices.

Is the monitor readable?

Yes

. One or more of those devices was causing interference. The

problem is resolved.

. Go to

step 4

Turn off the computer and the monitor, swap the monitor power cable

with a known working cable such as the computer cable, and then turn

on the computer and monitor.

Is the monitor working properly?

Yes

. You need a new power cable.

Contact Dell

for technical assistance.

. Go to the next question.

Do you have another monitor that is working properly?

Yes

. Go to

step 5

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды

Dell Precision Workstation 530, Руководство пользователя

Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Похожие инструкции для Precision Workstation 530

Бренды по названию

Популярные бренды