Dell Precision Workstation 530 Скачать руководство пользователя страница 154

Страница: 154 / 300

154

Solving Problems

.co

ll.c

Contact Dell

for technical assistance.

Keyboard Problems

Basic Checks:

•

Check the

diagnostic lights

to see if the specific problem is identified.

•

Disconnect the cable from the computer and check the cable

connector for bent or broken pins. Check for damaged or frayed cables.

•

Ensure that the cable is firmly connected to the computer.

•

If you are using a USB keyboard, ensure that you connect to one of the

Port 1 USB connectors on the computer back panel (see "

Back-Panel

Features

").

•

If you are using a PS/2 keyboard that can be configured with various

switch settings, ensure that the switch is set to PS/2, Enhanced XT/AT,

or PC/AT. The switch settings are usually on the bottom of the

keyboard, sometimes behind a panel. Refer to the documentation that

came with the keyboard for more information.

•

Check for interference. Keyboard extension cables can cause problems.

•

Restart the computer.

If the problem still exists after you complete the basic checks, fill out the

Diagnostics Checklist

as you perform the following steps:

Turn off the computer, wait 30 seconds, and turn it on again.

During the boot routine, do the Num Lock, Caps Lock, and Scroll

Lock lights on the keyboard blink momentarily?

Yes

. Go to

step 2

. Go to

step 3

Use the keyboard to type some characters.

Do the characters appear on the screen?

Yes

. The problem is resolved.

Contact Dell

for technical assistance.

Run the PC-AT Compatible Keyboards tests in the

Dell Diagnostics

Did any of the diagnostics tests fail?

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Dell Precision Workstation 530, Руководство пользователя, Страница: 154 / 300

Результаты поиска

Содержание Precision Workstation 530

Отзывы: