Dell Precision Workstation 530 Скачать руководство пользователя страница 48

Страница: 48 / 300

Advanced Features

.co

ll.c

Security

The computer provides the following methods to physically secure it:

• Chassis intrusion detection

• Security cable slot and padlock ring

Chassis Intrusion Detection

The chassis intrusion monitor can detect whether the computer is opened.
The

Chassis Intrusion

option in

system setup

displays the status of the

monitor.

Enter

system setup

Press the down-arrow key to move to the

System Security

option.

Press <Enter> to access the

System Security

option's pop-up menu.

Press the down-arrow key to move to the

Chassis Intrusion

option.

Press the spacebar to select an option setting.

Option settings:

•

Enabled

— When the computer cover is opened, a

DMI

event is

generated, the setting changes to

Detected

, and the following message

appears at the next system start-up:

Alert! Cover was previously removed.

To reset the

Detected

setting, enter

system setup

. In the

Chassis

Intrusion

option, press the left- or right-arrow key to select

Reset

, and

then choose

Enabled

Enabled-Silent

, or

Disabled

•

Enabled-Silent

(the default) — When the computer cover is opened,

a DMI event is generated and the setting changes to

Detected

, but the

alert message does not appear at the next system start-up.

•

Disabled

— No intrusion monitoring occurs and no messages appear.

NOTE:

When the

setup password

is enabled, you must know the setup

password before you can reset the Chassis Intrusion option.

Содержание Precision Workstation 530













































































































































































































































































































Результаты поиска

Содержание Precision Workstation 530

Отзывы:

Dell Precision Workstation 530, Руководство пользователя, Страница: 48 / 300

Результаты поиска

Содержание Precision Workstation 530

Отзывы: