manualshive.com logo in svg

Dell PowerEdge C6320p, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge C6320p Скачать руководство пользователя страница 96

3.

Install the air shroud.

4.

Install the sled into the enclosure.

5.

Follow the procedure listed in the After working inside your system section.

NOTE: For more information see the video at 

www.Dell.com/QRL/Server/C6320p/Processor

Related links

Safety instructions
Before working inside your system
Removing a sled
Removing the air shroud
Installing the non fabric processor into the processor and heat sink module
Installing the processor and heat sink module
Installing the air shroud
Installing a sled
After working inside your system

Installing the non fabric processor into the processor and heat sink module

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

CAUTION: Never remove the heat sink from a processor unless you intend to remove the processor. The heat sink is 
necessary to maintain proper thermal conditions.

WARNING: The heat sink may be hot to touch for some time after the system has been powered down. Allow the heat 
sink to cool before removing it.

1.

Follow the safety guidelines listed in the Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

3.

Remove the sled from the enclosure.

4.

Remove the air shroud.

Steps
1.

Ensure that the processor is in the CPU tray.

NOTE: Ensure that pin 1 indicator on the CPU tray is aligned with pin 1 indicator on the processor.

2.

Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.

NOTE: Ensure that pin 1 indicator on the bracket is aligned with pin 1 indicator on the processor before placing the 
bracket on the processor.

96

Содержание PowerEdge C6320p



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды