Dell PowerEdge C6320p, Руководство пользователя

Страница: 124 / 194

Installing the system battery - option A
Prerequisites
WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the
same or equivalent type recommended by the manufacturer. For more information, see the safety information that
shipped with your system.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Take the sled out of the enclosure.
4. Remove the system battery.
Steps
1.
Locate the battery socket. For more information, see the System board connectors section.
2. Push the battery lock connector away from the battery.
3. Insert the battery into the socket, and release the battery lock connector to secure the battery in place.
Figure 70. Installing the system battery
Next steps
1. Install the sled into the enclosure.
2. Follow the procedure listed in the After working inside your system section.
3. While booting, press F2 to enter System Setup and ensure that the battery is operating properly.
4. Enter the correct time and date in the System Setup Time and Date fields.
5. Exit System Setup.
Related links
Safety instructions
Before working inside your system
Removing a sled
Removing the system battery - option A
Installing a sled
After working inside your system
124