Dell PowerEdge C6320p, Руководство пользователя

Страница: 144 / 194

Figure 86. Removing a cooling fan
Next steps
1. Install a cooling fan.
2. Follow the procedure listed in the After working inside your system section.
3. For more information on the fan status, see the management software.
Related links
Safety instructions
Before working inside your system
Installing a cooling fan
After working inside your system
Installing a cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: Observe the routing of the cables when removing them from the system. Route these cables properly when you
replace them to prevent the cables from being pinched or crimped.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1.
Align the cooling fan with the sponge and slide it in the cooling fan cage until the cooling fan is firmly seated.
NOTE: The fan blades should face the front of the system.
2. Connect the fan cable to the connector on the cooling fan cage.
144