manualshive.com logo in svg

Dell PowerEdge C6320p, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge C6320p Скачать руководство пользователя страница 64

8

Installing and removing sled components

Inside the system

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

CAUTION: This system must be operated with the system cover installed to ensure proper cooling.

Figure 18. Inside the system

1.

power supply unit (2)

2.

power distribution board *(2)

3.

sled blank

4.

midplane (2)

5.

hard drive (24)

6.

backplane

7.

cooling fan (4)

8.

sled

64

Содержание PowerEdge C6320p



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды