Figure 102. Cable routing−power distribution board 2 (bottom)
1.
PDB 2
2.
12 V power cable
3.
ground cable
4.
midplane
Midplanes
In a 2.5 inch hard drive configuration, two midplanes connect the system boards of the sleds to the 2.5-inch hard drive backplane.
Removing the midplanes
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Remove all the sleds from the enclosure.
4.
Remove the cooling fan cage.
5.
Keep the Philips #2 and the Torx T20 screwdrivers ready.
Steps
1.
Remove the screws that secure the middle wall bracket and lift the bracket out of the chassis.
157
Содержание PowerEdge C6320p
