Dell PowerEdge C6320p, Руководство пользователя

Страница: 46 / 194

Viewing Processor Settings
To view the Processor Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS .
4. On the System BIOS screen, click Processor Settings .
Related links
Processor Settings
Processor Settings details
Processor Settings details
The Processor Settings screen details are explained as follows:
Option Description
L1 Prefetcher Enables or disables the L1 Prefetcher. This setting can affect performance, depending on the application
running on the server. Recommended for High Performance Computing applications. The default setting is
set to
Enabled .
L2 Prefetcher Enables or disables the L2 Prefetcher. This setting can affect performance, depending on the application
running on the server. Recommended for High Performance Computing applications. The default setting is
set to
Enabled .
Logical Processor
Enables or disables the logical processor and displays the logical processors. If this option is set to Enabled ,
the BIOS displays the logical processors. If this option is set to Disabled , the BIOS displays only one logical
processor per core. This option is set to Enabled by default.
Logical Processor
Idling Enables you to improve the energy efficiency of a system. It uses the operating system core parking
algorithm and parks some of the logical processors in the system which in turn allows the corresponding
processor cores to transition into a lower power idle state. This option can only be enabled if the operating
system supports it. It is set to
Disabled by default.
Configurable TDP Enables you to reconfigure the processor Thermal Design Power (TDP) levels during POST based on the
power and thermal delivery capabilities of the system. TDP verifies the maximum heat the cooling system is
needed to dissipate. This option is set to
Nominal by default.
NOTE: This option is only available on certain stock keeping units (SKUs) of the processors.
X2Apic Mode Displays the X2Apic Mode setting that is read only and permanently set to enabled.
Processor 64-bit
Support Specifies if the processor(s) support 64-bit extensions.
Processor Core
Speed Specifies the maximum core frequency of the processor.
Processor 1
The following settings are displayed for each processor installed in the system:
Option Description
Family-Model-
Stepping Specifies the family, model, and stepping of the processor as defined by Intel.
Brand Specifies the brand name.
46