Dell PowerEdge C6320p, Руководство пользователя

Страница: 173 / 194

Next steps
1. Install the hard drive cage into the enclosure.
2. Connect all the cables to the backplane.
3. Connect the control panel cables to the power distribution board.
4. Install all the removed hard drives.
5. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the control panel
Removing a hard drive carrier
Installing a hard drive carrier
After working inside your system
Thermal sensor board
The thermal sensor board is used to the monitor the ambient temperature around the enclosure.
Removing the sensor board cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
CAUTION: To maintain proper system cooling, all empty hard drive bays must have hard drive blanks installed.
Follow the safety guidelines listed in the Safety instructions section.
Steps
Pull the handle on the sensor board cover to remove the the sensor board cover out of the hard drive bay.
173