Dell PowerEdge C6320p, Руководство пользователя

Страница: 143 / 194

Figure 85. Installing the system cover
Next steps
1. Reconnect the system to the electrical outlet.
2. Turn on each sled in the system, including all the attached peripherals.
Related links
Safety instructions
Cooling fans
Servers use a lot of power to function, and that in turn generates a lot of heat. That heat, without a cooling system in place to
dissipate it, can destroy the electronic and mechanical parts of the server. In most cases, the simplest and most efficient way to
dissipate this heat is through the use of fans.
Removing a cooling fan
Prerequisites
WARNING: Do not attempt to operate the system without the cooling fans.
WARNING: The cooling fan can continue to spin for some time after the system has been powered down. Allow time for
the fan to stop spinning before removing it from the system.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: Observe the routing of the cables when removing them from the system. Route these cables properly when you
replace them to prevent the cables from being pinched or crimped.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
Disconnect the fan cable from the connector on the cooling fan cage and lift the fan out.
143