Dell PowerEdge C6320p Скачать руководство пользователя страница 125

Removing the system battery - option B

Prerequisites

WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the 
same or equivalent type recommended by the manufacturer. For more information, see the safety information that 
shipped with your system.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

1.

Follow the safety guidelines listed in the Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

3.

Take the sled out of the enclosure.

Steps
1.

Locate the battery socket. For more information, see the System board connectors section.

2.

Slant the battery away from the battery holder and pull the battery out of the socket.

Figure 71. Removing the system battery - clamp type holder

Next steps

1.

Install the system battery.

2.

Install the sled into the enclosure.

3.

Follow the procedure listed in the After working inside your system section.

4.

While booting, press F2 to enter System Setup and ensure that the battery is operating properly.

5.

Enter the correct time and date in the System Setup 

Time

 and 

Date

 fields.

6.

Exit System Setup.

Installing the system battery- option B

Prerequisites

WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the 
same or equivalent type recommended by the manufacturer. For more information, see the safety information that 
shipped with your system.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and 
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support 
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety 
instructions that are shipped with your product.

1.

Follow the safety guidelines listed in the Safety instructions section.

2.

Follow the procedure listed in the Before working inside your system section.

125

Содержание PowerEdge C6320p



































































































































































































Отзывы: