Dell PowerEdge C6320p, Руководство пользователя

Страница: 169 / 194

Figure 117. Installing the hard drive cage
5. Install the screws that secure the hard drive cage to the chassis.
6. Install the screws that secure the control panel to the chassis.
7. Reconnect the cables to the midplanes and PDB 1.
Next steps
1. Install the hard drives.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a hard drive carrier
Installing a hard drive carrier
After working inside your system
Control panel
A control panel allows you to manually control the inputs to the server. The control panel of the PE C6320p system has power
buttons and system identification buttons.
Removing the control panel
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: Observe the routing of the cable on the enclosure as you remove them. You must route these cables properly
when you replace them to prevent the cables from being pinched or crimped.
169