manualshive.com logo in svg

Dell PowerEdge C6320p, Руководство пользователя

Поделиться
Скачать
Dell PowerEdge C6320p Скачать руководство пользователя страница 17

Item

Indicator, Button, or 

Connector

Icon

Description

NOTE: On ACPI-
compliant operating 
systems, turning off the 
system by using the 
power button causes the 
system to perform a 
graceful shutdown 
before the system is 
turned off.

NOTE: To force an 
ungraceful shutdown, 
press and hold the power 
button for five seconds.

9

Sled without the integrated 
Quad Small Form-factor 
Pluggable port

Sled without the (optional) 
Mellanox ConnectX-4 VPI 
EDR / 100 GbE Embedded 
Port.

10

Sled with the Quad Small 
Form-factor Pluggable carrier 
card

Sled with the Quad Small 
Form-factor Pluggable carrier 
card and the fabric based 
processor.

Diagnostic indicators

The diagnostic indicators on the system indicate operation and error status.

Hard drive indicator patterns

Figure 7. Hard drive front view

1.

hard drive status indicator (green and amber)

2.

hard drive activity indicator (green)

17

Содержание PowerEdge C6320p



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды