Dell PowerEdge C6320p, Руководство пользователя

Страница: 68 / 194

Steps
Pressing the locks on either side of the air shroud, lift the air shroud out of the sled.
Figure 22. Removing the air shroud
Next steps
1. Install the air shroud.
2. Install the sled into the enclosure.
3. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a sled
Installing the air shroud
Installing a sled
After working inside your system
Installing the air shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the sled from the enclosure.
Steps
1.
Insert the air shroud into the sled, aligning the latches with the lock slots on the sled chassis.
NOTE: Ensure that both the SATA cables are routed through the air shroud cable guide slot behind the air shroud
latches.
68