Dell N1100-ON, Справочное руководство

Страница: 1521 / 2332

Layer 3 Routing Commands
1521
Example
console(config-if-vlan3)#ipv6 mld host-proxy reset-status
ipv6 mld host-proxy unsolicit-rprt-interval
Use the ipv6 mld host-proxy unsolicit-rprt-interval command to set the
unsolicited report interval for the MLD Proxy router. This command is only
valid when MLD Proxy is enabled on the interface. Use the “no” form of this
command to reset the MLD Proxy router's unsolicited report interval to the
default value.
Syntax
ipv6 mld host-proxy unsolicited-report-interval interval
no ipv6 mld host-proxy unsolicited-report-interval
• interval — The interval between unsolicited reports (Range: 1–260
seconds).
Default Configuration
The unsolicited report interval is 1 second by default.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines
Example
console(config-if-vlan3)#ipv6 mld host-proxy unsolicit-rprt-interval 10
ipv6 mld query-interval
The ipv6 mld query-interval command sets the MLD router's query interval
for the interface. The query-interval is the amount of time between the
general queries sent when the router is querying on that interface. Use the
“no” form of this command to set the query interval to the default.