Dell N1100-ON, Справочное руководство

Страница: 1499 / 2332

Layer 3 Routing Commands
1499
Syntax
show ip route [[ip-address [mask | prefix-length] [ longer-prefixes ] [ vrf vrf-
name] [ static ]
• ip-address —Specifies the network for which the route is to be displayed
and displays the best matching route for the address.
• mask —Subnet mask of the IPv4 address in dotted quad notation.
• prefix-length—Length of prefix, in bits. Must be preceded with a forward
slash (/). (Range: 0-32 bits.)
• longer-prefixes —Indicates that the ip-address and subnet-mask pair
becomes the prefix, and the command displays the routes to the addresses
that match that prefix.
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
• static —Display statically configured routes.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.
If the subnet mask is specified, then only routes with an exact match are
displayed. For example:
show ip route 192.168.2.0 /24
If only an IP address is specified, the best route for the IP address is displayed.
For example:
show ip route 192.168.2.0