Dell N1100-ON, Справочное руководство

Страница: 1497 / 2332

Layer 3 Routing Commands
1497
Example
The following shows example CLI display output for the command.
console# show ip protocols
Routing Protocol.......................... BGP
Router ID................................. 6.6.6.6
Local AS Number........................... 65001
BGP Admin Mode............................ Enable
Maximum Paths............................. Internal 32, External 32
Distance.................................. Ext 20 Int 200 Local 200
Address Wildcard Distance Pfx List
------- -------- -------- --------
172.20.0.0 0.0.255.255 40 None
172.21.0.0 0.0.255.255 45 1
Prefix List In............................ PfxList1
Prefix List Out........................... None
Neighbors:
172.20.1.100
Filter List In........................ 1
Filter List Out....................... 2
Prefix List In........................ PfxList2
ABR Status The number of OSPF areas with at least one interface running
on this router. Also broken down by area type.
ASBR Status Whether the router is an autonomous system boundary router.
The router is an ASBR if it is redistributing any routes or
originating a default route.
RIP Section
RIP Admin Mode Whether RIP is globally enabled.
Split Horizon Mode Whether RIP advertises routes on the interface where they were
received.
Default Metric The metric assigned to redistributed routes.
Default Route
Advertise
Whether this router is originating a default route.
Distance The administrative distance for RIP routes.
Interface The interfaces where RIP is enabled and the version sent and
accepted on each interface.
Parameter Description