Dell N1100-ON, Справочное руководство

Страница: 2281 / 2332

Switch Management Commands
2281
• port-number— Port number for use by the secure HTTP server. (Range:
1025–65535)
Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS TCP port should not be set to a value that might conflict with
other well known protocol port numbers used on this switch. It is not possible
for the administrator to directly configure the port number to 443 as 443 is
out of range. Use the no form of the command to set the port number to the
default value of 443.
Example
The following example configures the HTTPS port number to 4545.
console(config)#ip http secure–port 4545
ip http secure-server
Use the ip http secure-server command to enable the switch to be accessed
via HTTPS clients. To disable HTTPS access, use the no form of this
command.
Syntax
ip http secure-server
no ip http secure-server
Default Configuration
The default for the switch is disabled.
Command Mode
Global Configuration mode