Dell N1100-ON, Справочное руководство

Страница: 1666 / 2332

Layer 3 Routing Commands
1666
Use the no form of the command to disable state change logging.
Syntax
log-adjacency-changes [detail]
no log-adjacency-changes [detail]
• detail —(Optional) When this keyword is specified, all adjacency state
changes are logged. Otherwise, OSPF only logs transitions to FULL state
and when a backwards transition occurs.
Default Configuration
Adjacency changes are not logged by default.
Command Mode
OSPFv2 Router Configuration mode
User Guidelines
State changes are logged with INFORMATIONAL severity.
max-metric router-lsa
Use the max-metric router-lsa command in router OSPF Global
Configuration mode to configure OSPF to enable stub router mode.
To disable stub router mode, use the
no max-metric router-lsa command in
OSPFv2 Global Router Configuration mode.
Syntax
max-metric router-lsa [on-startup seconds] [summary-lsa {metric}]
no max-metric router-lsa [on-startup] [summary-lsa]
• on-startup —(Optional) OSPF starts in stub router mode after a reboot.
• seconds—(Required if on-startup) The number of seconds that OSPF
remains in stub router mode after a reboot. The range is 5 to 86,400
seconds. There is no default value.
• summary-lsa —(Optional) Set the metric in type 3 and 4 summary LSAs to
LsInfinity (0xFFFFFF).