Dell N1100-ON, Справочное руководство

Страница: 2066 / 2332

Switch Management Commands
2066
• seconds—For the idle parameter, the approximate number of seconds
after which an idle connection is closed. For the life parameter, the
approximate number of seconds since login after which a session is
closed.
Default Configuration
The default values are as follows:
• idle—180 seconds. Range: 1-3600
• life—1800 seconds. Range: 1-86400
Command Mode
Global Configuration
User Guidelines
This command configures the timeout for both HTTP and HTTPS sessions.
Changes to the parameters affect existing sessions. Reducing the time
parameters may close existing sessions.
The idle timeout closes sessions in which no activity is detected (e.g., no
commands are entered). The life timeout specifies the maximum number of
seconds a session will be kept open from the time the session was established.
Times are approximate.
Use this command to establish an access policy which maximizes throughput
or minimizes response time for new connections. For minimal response time
for new connections, use smaller values. For maximizing throughput (e.g.,
with dedicated management connections), use larger values.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config)#ip http timeout-policy idle 3600 life 86400
show debugging
Use the show d ebugging command to display packet tracing configurations.