Dell N1100-ON, Справочное руководство

Страница: 1173 / 2332

Data Center Technology Commands
1173
When the switch groups parameter is given, the following information is
displayed:
When the switch flows parameter is selected, the following output is shown:
Waiting for Space
Entries
Number of entries that are not currently in the hardware
because the attempt to insert the entry failed.
Flow Insertion Count. Total number of flows that were added to this table since
the switch powered up.
Flow Deletion Count. Total number of flows that were deleted from this table
since the switch powered up.
Insertion Failure Count. Total number of hardware insertion attempts that were
rejected due to lack of space since the switch powered up.
Parameter Description
Group Type Type of Group: Indirect, All, Select, etc.
Group Id Unique ID for the Group
Reference Count This count indicates how many Select groups are referring
to the current Indirect group. Reference Count is used
only for Indirect groups.
Duration The time since the group was created.
Bucket Count Number of Buckets in the group.
Reference Group Id References the Indirect group ID and used for Select
group only.
Parameter Description
Flow Type Type of the Flow 1.0 Flow or Layer 2 Match etc.
Flow Table The hardware table where the flow is installed.
Flow Priority Priority of the flow versus other flows. Higher is better.
Match Criterion The match criterion specified by the flow with the field
and value like ingress port or ether type
Ingress Port The port on which the flow is active.
Parameter Description