Dell N1100-ON, Справочное руководство

Страница: 848 / 2332

Security Commands
848
User Guidelines
Only one authentication method may be specified in the command. For the
RADIUS authentication method, if the RADIUS server cannot be contacted,
the supplicant fails authentication. The none method always allows access.
the ias method utilizes the internal authentication server. The internal
authentication server only supports the EAP-MD5 method.
Example
The following example configures 802.1x authentication to use no
authentication. Absent any other configuration, this command allows all
802.1x users to pass traffic through the switch.
console(config)# aaa authentication dot1x default none
The following example configures 802.1x authentication to use a RADIUS
server. A RADIUS server must be configured previously using the radius-
server host auth command for the radius method to succeed.
console(config)#aaa authentication dot1x default radius
aaa authentication enable
Use the aaa authentication enable command in Global Configuration mode
to set authentication for accessing higher administrator privilege levels when
logged in to the switch console. To return to the default configuration, use
the no form of this command.
Syntax
aaa authentication enable { default | list-name} method1 [method2...]
no aaa authentication enable { default | list-name}
• default — Uses the listed authentication methods that follow this
argument as the default list of methods, when using higher privilege levels.
• list-name — Character string used to name the list of authentication
methods activated, when using access higher privilege levels. (Range: 1-15
characters)
• method1 [method2...] — Specify at least one from the following table: