Dell N1100-ON, Справочное руководство

Страница: 1569 / 2332

Layer 3 Routing Commands
1569
mandatory. Discovering the local domain-name server is the intended use
of multicast messages on remote networks when there is less than one
server per network.
• Applications used for datacasting: Since multimedia transmission has
become increasingly popular, multicast transmission use has increased.
Multicast transmission may be used to efficiently accommodate this type
of communication. For instance, the audio and video signals are captured,
compressed and transmitted to a group of receiving stations. Instead of
using a set of point-to-point connections between the participating nodes,
multicasting can be used for distribution of the multimedia data to the
receivers. The participating stations are free to join or leave an audio-cast
or a video-cast as needed. The variable membership maintenance is
managed efficiently through multicasting.
Commands in this Section
This section explains the following commands:
clear ip mroute
Use this command to selectively clear IPv4 multicast entries from the cache.
clear ip mroute ip pim dense-mode show ip mfc show ip mroute static
arp ip pim dr-priority show ip multicast show ip pim
ip mroute ip pim hello-
interval
show ip pim
boundary
show ip pim bsr-router
ip multicast-routing ip pim join-prune-
interval
show ip multicast
interface
show ip pim interface
ip multicast ttl-
threshold
ip pim rp-address show ip mroute show ip pim neighbor
ip pim ip pim rp-candidate show ip mroute
group
show ip pim rp-hash
ip pim bsr-border ip pim sparse-mode show ip mroute
source
show ip pim rp
mapping
ip pim bsr-
candidate
ip pim ssm – show ip pim statistics