Dell N1100-ON, Справочное руководство

Страница: 1335 / 2332

Layer 3 Routing Commands
1335
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- ------
1010:10::/64 1010:10::103 0 65001 i
2020:20::/64 1010:10::103 0 65001 i
show bgp ipv6 statistics
Use this command to display statistics for the IPv6 decision process. This
command deprecates and replaces the show ipv6 bgp statistics command.
Syntax
show bgp ipv6 statistics
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration sub-modes.
User Guidelines
The following fields are displayed.
Field Description
Delta T How long since the decision process was run.
hours:minutes:seconds if the elapsed time is less than 24
hours. Otherwise, days:hours.
Phase The phase of the decision process that was run.
Upd Grp Outbound update group ID. Only applies when phase 3
is run.
GenId Generation ID of BGP routing table when decision
process was run. The generation ID is incremented each
time phase 2 of the decision process is run and when
there is a change to the status of aggregate addresses.
Reason The event that triggered the decision process to run