Dell N1100-ON, Справочное руководство

Страница: 1194 / 2332

Layer 3 Routing Commands
1194
The interface identifier is the identifier of the unnumbered interface, not the
loopback interface from which the IP address is borrowed.
When the IP address does not uniquely identify an ARP entry, the interface
must be given to uniquely identify the ARP entry. The interface may be
numbered or unnumbered.
Example
The following example removes the specified IP address from arp cache.
console#arp purge 192.168.1.10
arp resptime
Use the arp resptime command in Global Configuration mode to configure
the ARP request response time-out. To return the response time-out to the
default value, use the no form of this command.
Syntax
arp resptime integer
no arp resptime
• integer — IP ARP entry response time out. (Range: 1-10 seconds)
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response time-out of 5 seconds.
console(config)#arp resptime 5