Dell N1100-ON, Справочное руководство

Страница: 1401 / 2332

Layer 3 Routing Commands
1401
show ip prefix-list
This command displays the contents of IPv4 prefix lists.
Syntax
show ip prefix-list [detail [ prefix-list-name ] | summary [ prefix-list-name ] |
prefix-list-name [ network mask [longer] [first-match] | seq sequence-
number ]] [ detail | summary ] prefix-list-name [network network-mask ]
[ seq sequence-number] [ longer ] [ first-match ]
• detail | summary —(Optional) Displays detailed or summarized
information about all prefix lists.
• prefix-list-name—(Optional) The name of a specific prefix list.
• network—(Optional) The network number
• mask—Required if a network is specified. The network mask dotted-quad
notation. In dotted-quad notation, the 1 bits must be contiguous and left
justified.
• seq sequence-number—(Optional) Applies the sequence number to the
prefix list entry. The sequence number of the prefix list entry.
• longer —(Optional) Displays all entries of a prefix list that are more
specific than the given network/length.
• first-match —(Optional) Displays the entry of a prefix list that matches
the given network.
Default Configuration
No prefix lists are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
The following combinations of parameters are acceptable:
show ip prefix-list prefix-list-name network / length first-match
show ip prefix-list prefix-list-name network / length longer
show ip prefix-list prefix-list-name network / length