Dell N1100-ON, Справочное руководство

Страница: 1406 / 2332

Layer 3 Routing Commands
1406
Example
console# clear ip prefix-list orange 20.0.0.0 /8
clear ipv6 prefix-list
To reset the IPv6 prefix-list counters, use the clear ipv6 prefix-list command.
Syntax
clear ipv6 prefix-list [list-name | list-name ipv6-prefix/prefix-length]
• list-name – (Optional) Name of the IPv6 prefix list from which the hit
count is to be cleared.
• ipv6-prefix - An IPv6 network assigned to the specified prefix list. This
argument must be in the form documented in RFC 2373 where the
address is specified in hexadecimal using 16-bit values between 0x00 and
0xff and separated by colons. Counters are cleared only for the matching
prefixes.
•
prefix-length -
The length of the IPv6 prefix given as part of the ipv6-prefix.
Required if a prefix is specified. A decimal value in the range 0 to 128 that
indicates how many of the high-order contiguous bits of the address
comprise the prefix (the network portion of the address) in /length format.
A slash mark must precede the decimal value in /length format.
Default Configuration
No prefix lists are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration sub-
modes
User Guidelines
This command is used to clear the IPv6 prefix-list hit counters. The hit count
is a value indicating the number of matches to a specific prefix list entry. The
counters are also cleared by the global clear counters command.
Command History
Introduced in version 6.2.0.1 firmware.