Dell N1100-ON, Справочное руководство

Страница: 2265 / 2332

Switch Management Commands
2265
dir Display directory information.
disconnect Close remote console session(s).
dot1x Initialize dot1x or re-authenticate clients.
enable Enter into user privilege mode.
erase Delete a file.
exit Exit privileged exec mode.
filedescr Set a text description for an image file.
help Display help for various special keys.
locate Blink the locator LED.
logout Exit this session. Any unsaved changes are lost.
monitor Configure packet monitoring.
ping Send ICMP echo packets to a specified IP address.
quit Exit this session. Any unsaved changes are lost.
release Release an in-band DHCP assigned address.
reload Reload stack or a switch in the stack.
rename Rename a file.
renew Renew an in-band DHCP assigned address.
script Manage and execute configuration scripts.
show Show configured settings and operational status.
telnet Open a telnet connection to another system.
terminal Configure console session parameters.
test Test a copper port. Disable EEE modes first!
traceroute Trace route to destination.
udld Reset UDLD disabled interfaces.
unmount Flush cache and un-mount a USB device.
write Copy running configuration to startup configuration.
console(config-if-Gi1/0/1)#do a?
application arp
enable
Use the enable command in User Exec mode to enter the Privileged Exec
mode.
Syntax
enable
Default Configuration
The default privilege level is 15.