Dell N1100-ON, Справочное руководство

Страница: 697 / 2332

Layer 2 Switching Commands
697
Syntax
police-simple {datarate burstsize conform-action { drop | set-prec-transmit
cos | set-dscp-transmit dscpval | transmit } [ violate-action { drop | set-cos
transmit cos | set-prec-transmit cos | set-dscp-transmit dscpval |
transmit }]}
• datarate — Data rate in kilobits per second (Kbps). (Range: 1–
4294967295)
• burstsize — Burst size in Kbytes (Range: 1–128)
•
conform action — Configures the action taken for packets that do not
exceed the data rate or the burst size:
–
drop : Drop the packet.
– sec-prec-transmit ip-prec : Remark the IP precedence in the packet to
ip-prec and transmit. (Range 0-7)
– set-dscp-transmit dscp-val : Remark the DSCP in the packet to dscp-
val and transmit. (Range 0-63)
– set-cos-transmit 802.1p-priority : Remark the 802.1p priority in the
packet to 802.1p-priority and transmit. (Range 0-7)
– transmit : Transmit the packet unmodified.
The same actions are available for packets that violate the policing rule.
–
violate- action — Configures the action taken for packets that exceed
the data rate or burst size.
• cos — Class of Service value. (Range: 0–7)
• dscpval — DSCP value. (Range: 0–63 or a keyword from this list:
af11 ,
af12 , af13 , af21 , af22 , af23 , af31 , af32 , af33 , af41 , af42 , af43 , be , cs0 , cs1 ,
cs2 , cs3 , cs4 , cs5 , cs6 , cs7 , ef )
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode