Dell N1100-ON, Справочное руководство

Страница: 1415 / 2332

Layer 3 Routing Commands
1415
DVMRP Commands
Dell EMC Networking N3000/N3100/N4000 Series Switches
Distance Vector Multicast Routing Protocol (DVMRP) is a dense mode
multicast protocol and is most appropriate for use in networks where
bandwidth is relatively plentiful and there is at least one multicast group
member in each subnet. DVMRP assumes that all hosts are part of a
multicast group until it is informed of multicast group changes. When the
dense-mode multicast router is informed of a group membership change, the
multicast delivery tree is pruned. DVMRP uses a distributed routing
algorithm to build per-source-group multicast trees. It is also called Broadcast
and Prune Multicasting protocol. It dynamically generates per-source-group
multicast trees using Reverse Path Multicasting. Trees are calculated and
updated dynamically to track membership of individual groups.
Commands in this Section
This section explains the following commands:
ip dvmrp
Use the ip dvmrp command to set the administrative mode of DVMRP in the
router to active. Enabling DVMRP concurrently enables IGMP/MLD. Using
the no form of the command sets the administrative mode to inactive and
disables IGMP/MLD.
Syntax
ip dvmrp
no ip dvmrp
ip dvmrp show ip dvmrp neighbor
ip dvmrp metric show ip dvmrp nexthop
show ip dvmrp show ip dvmrp prune
show ip dvmrp interface show ip dvmrp route