Dell N1100-ON, Справочное руководство

Страница: 1171 / 2332

Data Center Technology Commands
1171
c
onsole(config-of-switch)#controller ipv4 1.2.3.4 port 3435 security ssl
show openflow
Use the show openflow command to display OpenFlow configuration and
status.
Syntax
show openflow [ switch controllers | switch flows | switch groups | switch
tables ]
• switch controllers —Show information about configured controllers
• switch flows —Show information regarding flows
• switch groups —Show information regarding OpenFlow groups
• switch tables —Show information regarding the switch tables
Default Configuration
When invoked with no parameters, the show openflow command shows
summary information regarding OpenFlow.
Command Mode
Privileged Exec and Global Configuration
User Guidelines
OpenFlow operates on the stack master only. Flows may not be configured on
stack members. Failover to the stack standby unit is not supported.
OpenFlow should only be enabled on stand-alone switches and should not be
enabled on stacks of switches. This restriction is not enforced.
The command has the following output.
Parameter Description
Administrative Mode The OpenFlow feature administrative mode set by the
‘openflow enable’ command.
Administrative Status The operational status of the OpenFlow feature. Although
the feature may be administratively enabled, it could be
operationally disabled due to various reasons.