4. Click
Apply
, and then click
OK
.
5. Close the
Devices and Printers
dialog box.
Windows Vista/Vista x64
1. Click
start
®
Control Panel
®
Hardware and Sound
®
Printers
.
2. Right-click the printer that is using the PS driver, and then select
Properties
from the displayed list.
3. Click the
Device Settings
tab, and then select
2-Tray Module
for the
Paper Tray Configuration
item under
Installable Options
.
4. Click
Apply
, and then click
OK
.
5. Close the
Printers
dialog box.
Windows Server 2008/Server 2008 x64
1. Click
start
®
Control Panel
®
Printers
.
2. Right-click the printer that is using the PS driver, and then select
Properties
from the displayed list.
3. Click the
Device Settings
tab, and then select
2-Tray Module
for the
Paper Tray Configuration
item under
Installable Options
.
4. Click
Apply
, and then click
OK
.
5. Close the
Printers
dialog box.
Windows XP/XP x64/Server 2003/Server 2003 x64
1. Click
start
®
Printers and Faxes
.
2. Right-click the printer that is using PS driver, and then select
Properties
from the displayed list.
3. Click the
Device Settings
tab, and then select
2-Tray Module
for the
Paper Tray Configuration
item under
Installable Options
.
4. Click
Apply
, and then click
OK
.
5. Close the
Printers and Faxes
dialog box.
Windows 2000/NT 4.0
1. Click
start
®
Settings
®
Printers
.
2. Right-click the printer that is using PS driver, and then select
Properties
from the displayed list.
3. Click the
Device Settings
tab, and then select
2-Tray Module
for the
Paper Tray Configuration
item under
Installable Options
.
4. Click
OK
.
5. Close the
Printers
dialog box.
Mac OS
®
X 10.5.x
1. Select the
Print & Fax
in
System Preferences
.
2. Select the printer in
Printers
list, and click
Options & Supplies
.
3. Select
Driver
, and select the options that have been installed on the printers, and then click
OK
.
Mac OS X 10.2.x/10.3.x/10.4.x
1. Select the printer from the
Printer List
screen in
Print Center
(or
Printer Setup Utility
).
2. Click
Printers
on the
Print Center
(or
Printer Setup Utility
) menu bar, and select
Show Info
.
3. Select
Installable Options
, and select the options that have been installed on the printer, and then click
Apply Changes
.
Installing a Duplexer
NOTICE:
To protect the drums of the print cartridges against bright light, close the front cover within five minutes. If the front cover remains open for more than five minutes, print quality may deteriorate.
1. Ensure that the printer is turned off.
2. Remove all packaging from duplexer.
3. Push the side button and open the front cover.
NOTICE:
Ensure that nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality.
4. Pull up on the belt release levers and rotate the belt unit up as shown in the illustration.
