Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
g. Click
Add
to display
Wireless network
properties
.
h. Enter the setting that you send to printer and click
OK
.
i. Click
Move up
to move the setting to the top of the list.
j. Click
OK
to close the
Property
dialog box.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless settings tool provided by your wireless device manufacturer.
For Windows Vista:
a. Open
Control Panel
.
b. Select
Network and Internet
.
c. Select
Network and Sharing Center
.
d. Select
Connect to a network
.
e. Select the setting you send to the printer from the network items listed in
Connect to a network
.
f. Select
Connect Anyway
in the warning dialog box indication indicating you are entering an unsecured area.
g. Click
Close
in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a. Open
Control Panel
.
b. Select
Network and Sharing Center
.
c. Select
Connect to a network
.
d. Select the setting you send to the printer from the network items listed in
Connect to a network
.
e. Select
Connect Anyway
in the warning dialog box indication indicating you are entering an unsecured area.
f. Click
Close
in the dialog box after confirming the connection is a success.
For Windows Server 2008 R2 and Windows 7:
a. Open
Control Panel
.
b. Select
Network and Internet
.
c. Select
Network and Sharing Center
.
d. Select
Connect to a network
.
e. Select the setting you send to the printer from the network items listed in the available network list, and click
Connect
.
f. Enter the
Security key
and click
OK
, if necessary.
Wireless Setting through Dell Printer Configuration Web Tool - Advanced setup
Access point (Infrastructure, DHCP network)
1. Create new wireless settings for your computer.
NOTE:
If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select
Network Connections
from Control Panel.
b. Right-click
Wireless Network Connection
and select
Properties
.
c. Select the
Wireless Networks
tab.
d. Ensure the check box for
Use Windows to configure my wireless network settings
is checked.
