f. Select the setting that you send to the printer in the list in
Preferred Network
group.
g. Click
Move up
to move the setting to the top of the list.
h. Click
OK
to close the
Property
dialog box.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless settings tool provided by your wireless device manufacturer.
For Windows Vista:
a. Open
Control Panel
.
b. Select
Network and Internet
.
c. Select
Network and Sharing Center.
d. Select
Connect to a network
.
e. Select the original setting from the network items listed in
Connect to a network,
and then click
Connect
.
For Windows Server 2008:
a. Open
Control Panel
.
b. Select
Network and Sharing Center.
c. Select
Connect to a network
.
d. Select the original setting from the network items listed in
Connect to a network,
and then click
Connect
.
For Windows Server 2008 R2 and Windows 7:
a. Open
Control Panel
.
b. Select
Network and Internet
.
c. Select
Network and Sharing Center
.
d. Select
Connect to a network
.
e. Select the original setting from the network items listed in the available network list, and then click
Connect
.
Scene 2. Construct new wireless network environment for both computer and printer (When wireless setting needs to be set to your computer)
For DHCP network:
1. Create wireless setting of your computer following the steps below.
NOTE:
If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select
Network Connections
from Control Panel.
b. Right-click
Wireless Network Connection
and select
Properties
.
c. Select the
Wireless Networks
tab.
d. Ensure the check box for
Use Windows to configure my wireless network settings
is checked.
NOTE:
Be sure to write down the current wireless computer settings in steps e and g so that you can restore them later.
e. Click the
Advanced
button.
f. Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
g. Click the
Add
button to display
Wireless network properties
.
h. Under the
Association
tab, enter the following information and click
OK
.
Network name (SSID): dell_device
