vi. Click the
Wireless LAN
sub-tab.
vii. Change the
SSID
setting (according to your Access point SSID) and change
Network Type
to
Infrastructure
.
viii. Click the
Apply new settings
button.
4. Once printer wireless adapter is properly configured, you may use the typical network printer installation method to complete driver installation.
5. To communicate with printer, you need to restore the previous wireless settings on your computer.
6. Restore the previous wireless settings for your computer.
NOTE:
If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select
Network Connections
from Control Panel.
b. Right-click
Wireless Network Connection
and select
Properties
.
c. Select the
Wireless Network
tab.
d. Click the
Advanced
button.
e. Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box (Applicable to printer with the wireless infrastructure mode).
f. Select the setting that you send to the printer in the list in the
Preferred Network
group.
