Re-enter
Password
Enter the password again.
Status
Information
Displays the status of NetWare.
SLP
Active
Discovery
Select the check box to enable
Active Discovery
.
*
1
The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (¥), back slash (\), double quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|),
slash (/), and space ( ).
NOTE:
The settings in the
NetWare
page will be valid only when NetWare or the printer is rebooted. Click the
Apply new settings
button to apply new settings.
NOTE:
An optional network protocol adapter is required to display the
NetWare
page.
SMB
Purpose:
To configure detailed settings for SMB.
Values:
Host Name
Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup
Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name
Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made. The default name is
admin
.
Administrator Password
Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is made. The default password is
password
.
Re-enter Administrator Password
Allows you to confirm the configured administrator password by re-entering the same password.
Maximum Sessions
Displays the maximum sessions.
Unicode Support
On
Notifies the host name and workgroup name in Unicode characters.
Off
Does not notify the host name and workgroup name in Unicode characters.
Auto Master Mode
On
Enable the Auto Master Mode.
Off
Disable the Auto Master Mode.
Encrypt Password
On
Encrypts the password.
Off
Does not encrypt the password.
Job Time-Out
Sets the timeout period from 60 to 3600 seconds.
Connection Time-Out
Sets the connection timeout period from 60 to 3600 seconds.
NOTE:
The settings in the
SMB
page will be valid only when the printer is rebooted. Click the
Apply new settings
button and reboot the printer to apply new settings.
NOTE:
An optional network protocol adapter is required to display the
SMB
page.
AppleTalk
Purpose:
To configure the detailed settings for AppleTalk.
Values:
Printer
Specifies the printer name in the AppleTalk network up to 32 alphanumeric characters and symbol sets.
AppleTalk Zone
Specifies the AppleTalk zone name up to 32 alphanumeric characters and symbol sets.
AppleTalk Type
Displays the AppleTalk type.
Delay Start Time
Specifies the delay start time between 1 and 255 seconds. A zero (0) value specifies no delay.
NOTE:
An optional network protocol adapter is required to display the
AppleTalk
page.
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking
E-Mail Alert
in the Left Frame.
Values:
