c. Select
Network and Sharing Center
.
d. Select
Connect to a network
.
e. Select
dell_device
from the network items listed in the available network list, and click
Connect
.
2. Check the IP address assigned by AutoIP on the printer.
e.g.: 168.254.1.1
3. Check that the IP address on your computer is assigned by DHCP.
4. Open Dell Printer Configuration Web Tool using WEB browser.
e.g.: http://168.254.1.1/
5. Change the wireless setting of the printer on Dell Printer Configuration Web Tool.
6. Reboot the printer.
7. Restore the wireless setting on your computer.
NOTE:
If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select
Network Connections
from Control Panel.
b. Right-click
Wireless Network Connection
and select
Properties
.
c. Select
Wireless Network
tab.
d. Click
Advanced
.
e. Do either of the following:
When wireless ad-hoc mode is set to the printer:
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
When wireless infrastructure mode is set to the printer:
Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
f. Select the setting that you send to the printer in the list in
Preferred Network
group.
g. Click
Move up
to move the setting to the top of the list.
h. Click
OK
to close the
Property
dialog box.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the manual of the wireless settings tool provided by your wireless device manufacturer.
For Windows Vista:
a. Open
Control Panel
.
b. Select
Network and Internet
.
c. Select
Network and Sharing Center.
d. Select
Connect to a network
.
e. Select the original setting from the network items listed in
Connect to a network,
and then click
Connect
.
For Windows Server 2008:
a. Open
Control Panel
.
b. Select
Network and Sharing Center.
c. Select
Connect to a network
.
d. Select the original setting from the network items listed in
Connect to a network,
and then click
Connect
.
For Windows Server 2008 R2 and Windows 7:
a. Open
Control Panel
.
