Select
PS Fonts List
to print a listing of the fonts available to the PostScript
®
3™.
4. Press
(Set)
button.
The message
PCL Fonts List Printing
or
PS Fonts List Printing
appears and remains on the operator panel until
the page prints. The printer returns to the
Ready to Print
state after the font sample list prints.
Using the Print and Hold Function
When you send a job to the printer, you can specify in the driver that you want the printer to hold the job in memory.
When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which job in
the memory or hard disk you want to print. You can use this function to print a confidential job (Secure Print), or verify
one copy before printing additional copies (Proof Print).
NOTE:
The printer holds the job until you delete it by using the operator panel or you turn off the printer. The data
on memory is cleared when the printer is turned off. The data on the optional hard disk is not cleared even when
the printer is turned off.
NOTE:
Print and Hold functions require a minimum of 512 MB available printer memory or hard disk. Also, you need
to configure the RAM disk settings on the operator panel and the printer driver.
NOTE:
Depending on the documents, its job may be too big for the available memory. In this case, an error occurs.
NOTE:
If a document name is not assigned to your print job in the printer driver, the job's name will be identified
using the PC's time and date of submission to distinguish it from other jobs you have stored under your name.
Printing and Deleting Held Jobs
Once held jobs are stored in print memory or hard disk, you can use the operator panel to specify what you want to do
with one or more of the jobs. You can select either
Secure Print
or
Proof Print
from "
Stored Print
". Then, you select
your user name from a list. If you select
Secure Print
, you must type the password you specified in the driver when you
sent the job. See "
Secure Print
" for more information.
From either the
Secure Print
or
Proof Print
menu items, you have three choices:
Print and Save
Del after Print
Delete
NOTE:
To send a job to print as Secure Printing or Proof Printing, select
Secure Print
or
Proof Print
in
Job Type
in the
Paper/Output
tab of the
Printing Preferences
dialog box.
Printing Held and Proof Print Jobs
When Using the Operator Panel
1. Press
Menu
button.
2. Press
button until
Report/List
appears, and then press
(Set)
button.
3. Press
button until either
Stored Document
appears, and then press
(Set)
button.
The stored documents page is printed.
Stored Print
