DEC DECstation 5000 Model 100 Series, Руководство по обслуживанию

Страница: 240 / 269

Promiscuous Mode Test
The promiscuous mode test checks the Ethernet’s ability to
receive packets in promiscuous mode. To run the promiscuous
mode test, type t x06 P1, and press Return.
When you use this test command
Replace x with the unit number of the Ethernet module
that you want to test.
Replace the optional parameter P1 with the specific address
in the Ethernet RAM buffer in which you want to set up
structures.
Promiscuous mode test parameters and error codes
Table F-43 describes the parameters used in promiscuous mode
test commands and error messages.
Table F-44 lists the error codes used in promiscuous mode test
error messages.
Table F-43. Promiscuous Mode Test Parameters
Parameter Description
P1 Ethernet RAM address used to set up structures
P2 Return status from any of the common subroutines
P3 Last value read from CSR0
F–34 Test Commands and Messages Produced by Version PDE3 ROM Chips