DEC DECstation 5000 Model 100 Series, Руководство по обслуживанию

Страница: 185 / 269

SCSI, Ethernet, and graphics configurations
To display detailed
information about a SCSI bus, Ethernet controller, or graphics
module configuration replace the optional unit parameter with
the unit number of the item about which you want information.
The first line of the optional module configuration display has
the form:
Optn# x - [AAAA-BB/ 0xcccccc/ 0xd]
The leftmost term in the first line is the module’s option slot
number. The following groups of letters and numbers separated
by slash marks have the following meaning:
The leftmost group is the module type code name.
The middle group is the module’s identification number.
The rightmost group shows the version of the module’s
ROM.
This is a sample configuration display for a SCSI bus with RZ55
disk drives at SCSI ID addresses 1 and 2:
Optn# 2 - [PMAZ-AA /0x5419876/0x0]
SCSI: (szn/ncr53c94 chip) [x.-000]
2: rz(1,2) -- Pid="RZ55’ (C)DEC", Vid=DEC, Rev"0700"
1: rz(1,1) -- Pid="RZ55’ (C)DEC", Vid=DEC, Rev"0700"
The second line shows the following:
The leftmost term indicates the module’s type.
The terms enclosed by parentheses give information about
the module hardware. The left term is the module’s driver
type. The right term is the module’s type of interface.
The last term in this line shows the version of the module
ROM’s firmware.
The last two lines describe drives linked to the SCSI controller.
The leftmost term is the device’s SCSI ID address.
The term second from the left indicates the drive’s type, the
system’s number for the drive’s SCSI bus, and the drive’s
SCSI ID address again.
Console Commands Generated by Version PDE3 ROM Chips E–7