DEC DECstation 5000 Model 100 Series, Руководство по обслуживанию, Страница: 136 / 269

To clear an existing password, include the -c parameter
when you type the passwd command. First use the passwd
command to enter the existing password. After the console
prompt >> appears, type passwd -c and press Return. The
system then removes the password requirement.
To set a new password, include the -s parameter. Enter the
new password at the
pwd:
prompt. When the
pwd:
prompt
appears a second time, type the password again. If the two
password entries match, the system sets the new value as
the password.
printenv Command
Use the printenv command to display the list of environment
variables.
The printenv command format is
printenv [variable]
To display the entire environment variable table, omit the
optional variable parameter.
To display an individual environment variable, replace
variable with the name of the environment variable you
want to display.
restart Command
Use the restart command to restart the system software. For
the restart operation to succeed, the software must have a
restart block set up in memory.
The restart command format is restart.
script Command
Use the script command to create a temporary set of console
commands that in an order that you establish.
The script command format is script name.
When you type the script command, replace name with the
name that you are giving the script, and press Return.
Console Commands C–21