[61]
Comparator 1
See
parameter group 13-1* Comparators
. If comparator 1 is evaluated as true, the output goes
high. Otherwise, it is low.
[62]
Comparator 2
See
parameter group 13-1* Comparators
. If comparator 2 is evaluated as true, the output goes
high. Otherwise, it is low.
[63]
Comparator 3
See
parameter group 13-1* Comparators
. If comparator 3 is evaluated as true, the output goes
high. Otherwise, it is low.
[64]
Comparator 4
See
parameter group 13-1* Comparators
. If comparator 4 is evaluated as true, the output goes
high. Otherwise, it is low.
[65]
Comparator 5
See
parameter group 13-1* Comparators
. If comparator 5 is evaluated as true, the output goes
high. Otherwise, it is low.
[70]
Logic rule 0
See
parameter group 13-4* Logic Rules
. If logic rule 0 is evaluated as true, the output goes high.
Otherwise, it is low.
[71]
Logic rule 1
See
parameter group 13-4* Logic Rules
. If logic rule 1 is evaluated as true, the output goes high.
Otherwise, it is low.
[72]
Logic rule 2
See
parameter group 13-4* Logic Rules
. If logic rule 2 is evaluated as true, the output goes high.
Otherwise, it is low.
[73]
Logic rule 3
See
parameter group 13-4* Logic Rules
. If logic rule 3 is evaluated as true, the output goes high.
Otherwise, it is low.
[74]
Logic rule 4
See
parameter group 13-4* Logic Rules
. If logic rule 4 is evaluated as true, the output goes high.
Otherwise, it is low.
[75]
Logic rule 5
See
parameter group 13-4* Logic Rules
. If logic rule 5 is evaluated as true, the output goes high.
Otherwise, it is low.
[80]
SL digital output A
See
parameter 13-52 SL Controller Action
. The input goes high whenever the smart logic action
[38] Set dig. out. A high
is executed. The input goes low whenever the smart logic
[32] Action Set
dig. out. A low
is executed.
[81]
SL digital output B
See
parameter 13-52 SL Controller Action
. The input goes high whenever the smart logic action
[39] Set dig. out. B high
is executed. The input goes low whenever the smart logic
[33] Action Set
dig. out. B low
is executed.
[82]
SL digital output C
See
parameter 13-52 SL Controller Action
. The input goes high whenever the smart logic action
[40] Set dig. out. C high
is executed. The input goes low whenever the smart logic
[34] Action Set
dig. out. C low
is executed.
[83]
SL digital output D
See
parameter 13-52 SL Controller Action
. The input goes high whenever the smart logic action
[41] Set dig. out. D high
is executed. The input goes low whenever the smart logic
[35] Action Set
dig. out. D low
is executed.
[160] No alarm
The output is high when no alarm is present.
[161] Running reverse
The output is high when the drive is running counterclockwise (the logical product of the status
bits running and reverse).
[165] Local ref. active
The output is high when local reference is activated by the [Hand On] key on the LCP or by
hand-on command of digital input.
[166] Remote ref. active
The output is high when remote reference is activated by the [Auto On] key on the LCP or by
auto-on command of digital input.
[167] Start command activ
The output is high when there is an active start command (that is, via digital input bus connec-
tion or [Hand On] or [Auto On], and no stop command is active.
AU363928304090en-000101 / 130R0982 | 81
Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide
