[27] Logic rule 1
Use the result of logic rule 1 in the logic rule.
[28] Logic rule 2
Use the result of logic rule 2 in the logic rule.
[29] Logic rule 3
Use the result of logic rule 3 in the logic rule.
[33] Digital input DI18
Use the value of DI18 in the logic rule (High = True).
[34] Digital input DI19
Use the value of DI19 in the logic rule (High = True).
[35] Digital input DI27
Use the value of DI27 in the logic rule (High = True).
[36] Digital input DI29
Use the value of DI29 in the logic rule (High = True).
[39] Start command
This event is True if the drive is started by any means (either via digital input, or other).
[40] Drive stopped
This event is True if the drive is stopped or coasted by any means (either via digital input, or other).
[42] Auto Reset Trip
This event is True if the drive is tripped (but not trip-locked) and an automatic reset is issued.
[50] Comparator 4
Use the result of comparator 4 in the logic rule.
[51] Comparator 5
Use the result of comparator 5 in the logic rule.
[60] Logic rule 4
Use the result of logic rule 4 in the logic rule.
[61] Logic rule 5
Use the result of logic rule 5 in the logic rule.
[83] Broken Belt
A broken-belt condition has been detected. Enable this function in
parameter 22-60 Broken Belt
Function
.
13-02 Stop Event
Default value: [40] Drive stopped
Parameter type: Option
2-setup: 1 setup
Conversion index: -
Data type: u_int8
Change during operation: True
Select the condition (True or False) which deactivates the smart logic controller.
Table 220: Option:
[0]
False
Enter the fixed value False in the logic rule.
[1]
True
Enter the fixed value True in the logic rule.
[2]
Running
See
parameter 13-01 Start Event
for further description.
[3]
In range
See
parameter 13-01 Start Event
for further description.
[4]
On reference
See
parameter 13-01 Start Event
for further description.
[7]
Out of current range See
parameter 13-01 Start Event
for further description.
[8]
Below I low
See
parameter 13-01 Start Event
for further description.
[9]
Above I high
See
parameter 13-01 Start Event
for further description.
[16] Thermal warning
See
parameter 13-01 Start Event
for further description.
[17] Mains out of range
See
parameter 13-01 Start Event
for further description.
[18] Reversing
See
parameter 13-01 Start Event
for further description.
[19] Warning
See
parameter 13-01 Start Event
for further description.
[20] Alarm (trip)
See
parameter 13-01 Start Event
for further description.
AU363928304090en-000101 / 130R0982 | 117
Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide
